Gallery2019-06-26T09:39:31-05:00

DESIGN & PROJECT ENGINEERING – BLENDER PIPING ASSEMBLY

Bighorn recreated a customers unit from measuring the parts in the field and turning those measurements in to a 3D model. From the 3D model, we created fabrication drawings.

DESIGN ENGINEERING & FABRICATION – PIPING MANIFOLDS

We designed a custom manifold per our customer’s requirements, for their trailer mounted piece of equipment. After we modeled the manifold, we then created drawings to fabricate the manifold.

DESIGN ENGINEERING & FABRICATION – PUMP MOUNT

Our customer needed help with creating a mount that would weld to the side of their trailer frame. With the 3D model of the pump, we were able to create the mount in our CAD platform. After this, we created drawings to build the pump mount.

FABRICATION – SKID WELDMENT FOR A PRESSURE VESSEL

Our production team tackled a skid weldment for our customer. The skid will have a pressure vessel installed on it, along with multiple pipe spools.

FABRICATION – FRAC TRAILER

We worked closely with our customer to help create a trailer per their requirements.

FABRICATION – BOOST PUMP INSTALL

Our customer needed help with relocating a centrifugal pump. Our production team drew up a scope of work per our customers requirements, and began this custom fabrication project. This project entailed two custom pipe spool runs, suction manifold, and a robust pump mount.

CONTACT US

877.214.9183 | info@BigHornFab.com
41303 Park 290 Dr | Waller, TX 77484